Event properties

• Active - Turns on and off event. Useful if you don’t want to receive event messages but want to keep event for further usage.

• Event name - event name that will be displayed in events list.

• Event type - current system version supports these events:

Events listed below must be supported by GPS device:

• SOS - notification of SOS alarm button is pressed on the object.

• Bracelet on - event is triggered if handcuffs are fastened.

• Bracelet off - event is triggered if handcuffs are opened.

• Man down - event is triggered if object lies on the ground (mostly used to monitor people body position).

• Shock - event is triggered if GPS device was shaked.

• Tow - event will be sent if GPS device detects object movement with turned off ignition.

• Power cut - event is triggered if GPS device power leads were disconnected.

• GPS antenna cut - event is triggered if device GPS antenna is cut, not connected or broken.

• Signal jamming - event is triggered if GPS device detects signal jamming.

• Low DC - event is triggered if GPS device DC (direct current) is too low.

• Low battery - event is triggered if battery voltage is too low.

• Harsh acceleration - event is triggered if GPS device detects sudden object acelereration.

• Harsh braking - event is triggered if GPS device detects sudden object braking.

• Harsh cornering - event is triggered if GPS device detects sudden object cornering.

• Parameter - event is triggered if parameter received from device meets set condition.

• Sensor - event is triggered if sensor meets set conditions.

• DTC (Diagnostic Trouble Codes) - event is triggered if device sends DTC error codes to server.

Events listed below are independent from GPS device:

• Connection yes - event is triggered if GPRS connection with GPS device was established.

• Connection no - event is triggered if GPRS connection with GPS device was lost.

• GPS yes - event is triggered if connection with GPS device was established.

• GPS no - event is triggered if connection with GPS device was lost.

• Stopped - event is triggered if GPS device is standing longer than set period of time.

• Moving - event is triggered if GPS device is moving longer than set period of time.

• Engine idle - event is triggered if GPS device engine is idling longer than set period of time.

• Overspeed - object exceeded predefined speed.

• Underspeed - object have slowed down below the specified speed.

• Service - allows to set a reminder about vehicle maintenance work (example: change engine oil).

• Route in - object crossed predefined route.

• Route out - object distanced from predefined route.

• Zone in - object entered zone.

• Zone out - object left zone.

• Time period (min) - event will be triggered if chosen event type lasts for set period of time.

• Speed limit (kph) - sets speed limit, works with overspeed and underspeed events.

• Parameters and sensors - trigger event regarding sensor condition.

• Objects - select objects which data will be used to trigger events.

• Trigger event depending on routes

  • Off - disable dependency.

  • In selected routes - event will be triggered if object goes into selected route.

  • Out of selected routes - event will be triggered if object goes out of selected route.

• Select routes - select route from list (learn how to create routes). For multiple selection keep "Ctrl" button pressed.

• Trigger event depending on zones

  • Off - disable dependency.

  • In selected zones - event will be associated only to selected zones.

  • Out of selected zones - event will be associated to all zones except selected ones.

• Selected zones - select zone from list (learn how to create zone). For multiple selection keep "Ctrl" button pressed.